Panasonic KX-TD308 User Manual page 44

2.1 Station Programming Instructions
To confirm the assigned function data
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
access number
2
HOLD
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
— If you wish to change the data, follow the programming procedure explained in this
section.
* A programming access number is required to program/confirm the function data by Station Programming.
† Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable
Panasonic Voice Processing System (one that supports digital proprietary telephone integration; e.g. KX-
TVS100).
1. Enter the programming access number* as follows:
- 1 : Preferred Line Assignment — Outgoing
- 2 : Preferred Line Assignment — Incoming
- 3 : Full One-Touch Dialing Assignment
- 4 : Intercom Alert Assignment
- 5 : Call Waiting Tone Type Assignment
- 6 : Self-Extension Number Confirmation
- 7 : Live Call Screening Mode Set
- 81 : Initial Display Selection
- 82 : Bilingual Display Selection
- 9 : Handset/Headset Selection
- 01 : Remote Station Lock Control
(— Operator / manager only)
- 02 : Call Log Lock Control, Incoming
(— Operator / manager only)
- 03 : Live Call Screening Password Control
(— Operator / manager only)
- # : Station Programming Data Default Set
• The display shows the programmed data.
<Example>
When you press [5], the display shows:
C.W. Tone 1
(— The Call Waiting tone is now programmed to Tone 1.)
2. Press the HOLD (END) button.
• The display shows the initial programming mode.
Station Programming (Personal Programming)
†
†
2-3