Panasonic AJ-YAC960P Installation Manual page 7

SDTI Interface Board
11.
Insert the SDI board at the position marked "F4" on the main unit side.
12.
Following the same procedure as in step 7, attach the two flat cables to the connectors on the F5 board,
and wedge the excess lengths of these cables between the F5 and F6 boards.
13.
Insert the coaxial cables between the F4 and F5 boards.
14.
Install the metal board clamp using the screw for this purpose, and secure the top panel to the main unit
using the two coin screws.
(F4) SDI and SDTI boards
E-6
(F4) SDI and SDTI boards
F5 board
F5 board F6 board
Metal board clamp Screw
F6 board