Example :
To change the extension number which is assigned to jack number 02 to 140, the extension number which is assigned to jack number 05 to 150
and the extension number which is assigned to jack number 07 to 155.
q
key.
Example :
To change the extension number which is assigned to jack number 15 to 160.
Press the
Main Command
n
SHOW mode
q
Press
the
maCR(l)l
Main Command
Programming Table
See page 11-l.
Extension number which is assigned to jack number 02
Main Command
key.
Extension Number (last 2 digits).
Parameter Number
Display (In case of default)
key
.
; s > 1-1
Extension number which is assigned to jack number 07
Extension number which is assigned to jack number 05
Note
Equipment is shown with last 2 digits.
5 -