Panasonic KX-T123211D Programming Manual page 92

On-site / remote administration has 5 modes excluding an unsetting
mode and prompt shows the current mode.
(Setting mode command)
unsetting mode
. . . . . . . . . . . .
E>
. . . . . . . . . .
s>
P>
; System Working Report mode
; D> . Diagnostic mode . . . . . . . .
Mode / Style Exit . . . . .
"END" is used to remove a command.
Edit / Show mode must be entered after the disposal style is set. The
Style are Interactive style ("ITT" command) and Batch style ("FIL"
command) and These styles are done only with Edit / Show mode.
Carriage Return ( 1 ) key is used to execute a command.
Enable to enter large or small alphabet character.
Message or prompt corresponding to the command are indicated
with right enterance.
"Command error" is indicated with incorrect enterance.
The digt of a command are three digits.
Supplement
EDT
. .
SHW
. .
DMP
. . .
RPT
. . .
DIG
.
END - Mode Style
remove command
There is "HLP" command to help which modes must be entered
next and this command can be entered with every mode.
Example ; If enter the "HLP" command after the starting
message of administration, the following message are
indicated.
remote administration
ver 2.0 Panasonic CO., LTD
; **Jan. 1. 1988 12:00'AM**
; Tfe "HLP" displays command informations
Press the "HLP"
. . . . . . . . . . . . . . . . . . . .
.
.
.
Workingreport
. . . . . . . . . . . . . . .
t
If Diagnostic Card is not installed, this item will not appear.
RPT
I