Faxing A4 Size Documents From The Scanner Glass; Canceling A Fax In Progress; Transmission Verification Report - Brother MFC-7360N User Manual

Chapter 4
Faxing A4 size documents
from the scanner glass
When faxing A4 size documents, you will
need to set the scan glass size to A4;
otherwise, a portion of your faxes will be
missing.
a
Make sure you are in Fax mode
b
(MFC-7360N)
Press Menu, 1, 7.
(MFC-7460DN and MFC-7860DW)
Press Menu, 1, 7, 1.
Document Scan
1.Glass ScanSize
c
Press a or b to choose A4.
Press OK.
d
Press Stop/Exit.

Canceling a fax in progress

Press Stop/Exit to cancel the fax. If you
press Stop/Exit while the machine is dialing
or sending, the LCD will show as below:
Dialing #XXX
1.Clear 2.Exit
Sending #XXX
1.Clear 2.Exit
Press 1 to cancel the fax.
26
Transmission verification
report
4
You can use the Transmission Verification
Report as proof that you sent a fax. This
report lists the receiving party's name or fax
number, the time and date of transmission,
duration of transmission, number of pages
sent, and whether or not the transmission
.
was successful.
There are several settings available for the

Transmission Verification Report:

 On: Prints a report after every fax you
send.
 On+Image: Prints a report after every fax
you send. A portion of the fax's first page
appears on the report.
 Off: Prints a report if your fax is
unsuccessful due to a transmission error.
Off is the default setting.
Off+Image: Prints a report if your fax is

unsuccessful due to a transmission error.
4
A portion of the fax's first page appears on
the report.
a
Press Menu, 2, 4, 1.
Report Setting
1.Transmission
b
Press a or b to choose On, On+Image,
Off or Off+Image.
Press OK.
c
Press Stop/Exit.
Note
• If you choose On+Image or Off+Image,
the image will only appear on the
Transmission Verification Report if Real
Time Transmission is set to Off. (See
Real Time Transmission in Chapter 3 of
the Advanced User's Guide.)
• If your transmission is successful, OK will
appear next to RESULT on the
Transmission Verification Report. If
transmission is not successful, NG will
appear next to RESULT.
4