Ls Specify Line Spacing With Line Feed - Brother RJ-4030 Software Manual

^LS Specify line spacing with line feed
ASCII: ^
Decimal: 94
Hexadecimal: 5E
Parameters
0≤n1≤2
0≤n2≤9
0≤n3≤9
Description
Specifies the number of dots for the line spacing when a line feed is entered.
(n1*100)+(n2*10)+n3: Number of dots for the line spacing (0 to 255)
The default number of dots for the line spacing when a line feed is entered is the number of dots
determined when the template is created in P-touch Editor.
This command is a dynamic command.
Remarks
The number of dots for the line spacing can be between 0 and 255. This command becomes invalid if any
other value has been specified.
1 dot=1/203 inch
1 dot≈0.125 mm
Example
To set the line spacing to 10 dots:
^ L S 0 1 0
(5Eh 4Ch 53h 30h 31h 30h)
L S n1 n2 n3
76 83 nd1 nd2 nd3
4C 53 nh1 nh2 nh3
- 40 -
P-touch Template 2.0 Command Reference
7. Control Command Details