Qv Specify Qr Code Version - Brother RJ-4030 Software Manual

^QV Specify QR Code version
ASCII: ^
Decimal: 94
Hexadecimal: 5E
Parameters
0≤n1≤9
0≤n2≤9
Description
Specifies the QR Code version.
(n1*10)＋n2: Version number (between 0 and 40)
The default QR Code version is 0.
This command becomes invalid if a value other than those that can be set (between 0 and 40) has been
specified.
This command is a dynamic command.
Example
To change the version to 10:
Since n1=1 and n2=0, the command will be as follows.
^ Q V 1 0
(5Eh 51h 56h 31h 30h)
Q V n1 n2
81 86 nd1 nd2
51 56 nh1 nh2
- 46 -
P-touch Template 2.0 Command Reference
7. Control Command Details