Ct Function To Set The Time Of Day - Silvercrest CDV-710 User Manual

The setting is saved either when the desired value is confirmed by pressing the control dial
through automatic memory (don't change anything on the device for approx. five seconds). If
you confirm the selection by pressing the control dial
If you use the automatic memory, the device will return to the standard display.
Note:
This setting only affects the radio mode and can only be carried out while the radio mode is
active.

21.4 CT function to set the time of day

To set or change the time settings, press the control dial
"LOC" function will appear. Press the control dial
"CT". There you have the option of setting the time of the device by turning the dial. Turning to
the right changes the number of the hours, turning to the left, the minutes.
The setting is saved either when the desired value is confirmed by pressing the control dial
through automatic memory (don't change anything on the device for approx. five seconds). If
you confirm the selection by pressing the control dial
If you use the automatic memory, the device will return to the standard display.
Note:
If the device receives an RDS station with an RDS time signal, the clock will be automatically
updated in particular intervals.
, you will reach the next possible setting.
until you get to menu level 2. The
repeatedly until you get to the menu item
, you will reach the next possible setting.
or
or
57