Troubleshooting - Silvercrest CDV-710 User Manual

27 Troubleshooting

If an error occurs, please consider these instructions before you have the device repaired. If you
are unable to solve a problem despite these instructions, please consult the hotline. Don't try
repairing the device yourself under any circumstances. In that event the device would lose its
warranty.
Problem Cause
The frame can't be
The disassembly key was not
slid off the device
inserted correctly.
towards the rear
The connection cables haven't
The device does not been attached correctly.
play back any music The "MUTE" or "PAUSE" button
are pressed.
On / off button was pressed too
briefly.
The operating unit isn't inserted
correctly.
The operational contacts are
The device can't be
soiled.
turned on
The ignition is turned off.
The connection cables haven't
been attached correctly.
The fuse is blown.
Solution
Reinsert the key. Make sure that the protrusion
on the disassembly key points away from the
device during the insertion.
Please check if all cables have been attached
correctly.
Press the "MUTE" or "PAUSE" button again.
Keep the on / off button pressed longer.
Reinsert the operating unit.
Clean the operational contacts.
Turn on the ignition.
Please check if all cables have been attached
correctly.
Replace the fuse.
77