Camera; R Shutter-Priority Ae - Canon EOS Rebel T2 SERIES' EOS 300X SERIES Instruction Manual

R Shutter-Priority AE

In this mode, you set the shutter speed and the camera sets the
aperture value automatically to suit the subject brightness. A fast
shutter speed can freeze the motion of a fast-moving subject and a
slow shutter speed can blur the subject to give the impression of
motion.
∗ <R> stands for Time value which is the shutter speed.
Shutter Speed Display
The shutter speeds from "
the fractional shutter speed. For example, "
sec. Also, "
1
Turn the Mode Dial to <R>.
2 Select the desired shutter
speed.
•
Turn the <l> dial.
•
The shutter speed can be set in
half-stop increments.
3 Focus the subject.
The aperture value is set
s
automatically.
4 Check the viewfinder display
and take the picture.
•
If the aperture value display is not
blinking, a correct exposure will be
obtained.
• If the maximum aperture value blinks, it indicates
underexposure. Turn the <l> dial to set a
slower shutter speed until the blinking stops.
• If the minimum aperture value blinks, it indicates
overexposure. Turn the <l> dial to set a faster
shutter speed until the blinking stops.
" to " " indicate the denominator of
" indicates 0.7 sec, and "
" indicates 1/125
" indicates 15 sec.
35