Reference - Canon EOS Rebel T2 SERIES' EOS 300X SERIES Instruction Manual

Reference

Feature Availability Table
Mode Dial Mode
One Shot
AI Servo
AI Focus
Auto
AF Point
Selection
Manual
Single frame
Continuous
Self-timer/
Remote control
Troubleshooting Guide
If there is a problem, first refer to this Troubleshooting Guide.
•
Nothing is displayed on the LCD panel.
The batteries are exhausted. / The batteries have been installed incorrectly.
Replace the batteries with new ones. / Install the batteries correctly. (p.11)
s
•
The picture looks blurred.
The lens focus mode switch is set to <MF>.
Set the lens focus mode switch to <AF>. (p.13)
s
There was camera shake when the picture was taken.
Hold the camera steady or use a faster shutter speed. (p.14)
s
•
The shutter does not work.
On the LCD panel, the frame count is not displayed and the <=> icon blinks.
Take out the film and load it correctly. (p.15)
s
The focus confirmation light <n> in the viewfinder blinks and focus
cannot be achieved.
Select another AF point. (p.29) If focus still cannot be achieved, focus manually. (p.31)
s
•
The <π> icon blinks on the LCD panel.
The battery level is very low.
Replace the batteries with new ones. (p.11)
s
A misoperation has occurred.
Press the shutter button halfway. (p.14) / Remove the batteries and reload it. (p.11)
s
π
If the < > icon does not stop blinking, consult your nearest service center.
: Set automatically.
U
I O P A S T R E W
Y
: User-selectable/settable.
Q
49