Energy Saving Tips; Temperature Controls - Frigidaire 242101800 Use & Care Manual

ENERGY SAVING TIPS

•
Install the wine cooler in the coolest part of a dry and
ventilated room, out of direct sunlight and away from
heating ducts or registers. Do not place the wine
cooler next to heat-producing appliances such as a
range, oven or dishwasher.
• Level the wine cooler so the door closes tightly.
•
Do not overcrowd the wine cooler or block cold air
vents. Doing so causes the wine cooler to run longer
and use more energy. Shelves should not be lined
with aluminum foil, wax paper or paper toweling.
Liners interfere with cold air circulation, making the
wine cooler less efficient.
• Wipe bottles and containers dry before placing them
in the wine cooler. This cuts down on moisture build-
up inside the unit.
• Organize the wine cooler to reduce door openings.
Remove as many items as needed at one time and
close the door as soon as possible.

tEMpERAtuRE cOntROLS

Cool Down Period
For best performance, allow 4 hours for the wine cooler
to cool down completely. The wine cooler will run
continuously for the first several hours.
Temperature Control
•
Adjust temperature gradually: move the knob in small
increments, allowing the temperature to stabilize.
•
For colder temperatures, turn the knob towards
Colder.
•
For warmer temperatures, turn the knob towards
Cold.
The temperature range MIN and MAX is 41° - 64° F,
which is ideal for wine storage.
Note that by turning the temperature control knob to
OFF, it only stops the cooling cycle but does NOT turn off
the wine cooler.
If the wine cooler is unplugged from the power supply,
you must wait 3 to 5 minutes before restarting the wine
Cooler.
6
International or other national or regional standards:
UL 250 BULLETINS-2003 U.S.A. household fridge safety requirements
IEC 61000-3-4-1998
Limitation of emission of harmonic currents in low-voltage power supply
systems for equipment with rated current greater than 16 A
Adjustable Interior Shelves
UL 250 BULLETINS2-2003
Multi-position adjustable interior shelves can be moved
requirements
to any position for larger or smaller bottles. The shipping
Enterprise Standard
spacers that stabilize the shelves for shipping should be
removed and discarded.
Q/MB 004-2007 Wine Cooler
Interior Light (Some models)
The light comes on automatically when the door is
opened. To replace the light bulb, turn the temperature
control to OFF and unplug the electrical cord. Replace the
old bulb with a bulb of the same wattage.
Know About Wine Cooler
1 Lamp assembly
2 Glass door
The illustration might be different from the actual products.
3 Steel wire racks
4 Temperature knob
5 Lamp control switch
6 Adjustable leg
Electromagnetic compatibility (EMC) - Limits -
fEAtuRES
U.S.A. household
Fig. 1
- 6 -
fridge safety
1
2
3
4
5
6