Use Of The Remote Control - Philips 28PW9763/58 User Manual

u
Select your computer or other
peripherals
Press this key repeatedly to select
or
EXT2, EXT3, FRONT
where you connected your peripherals
M
Mode selection
Press this key repeatedly to indicate the
peripheral equipment you want to operate
with the remote control.
TV
TV operation
Press this key to use the remote control
directly in the TV mode
Zoom (not available in VGA mode)
Press the key repeatedly to select one
ZOOM
of the zoom magnifications (x1, x4, x9, x16).
Additionally you can shift the selected zoom
window over the screen with the A keys.
The zoom window is reset after: selecting
another TV channel, another picture format
or when another picture format is selected
automatically, or the dual screen mode.
Zooming is disabled in Dual screen mode.
Dynamic Contrast is disabled when zoom is
b
Dual Screen
q
Picture format
To select predefined picture and sound
Each time it is pressed, a different picture
setting is selected, corresponding with a
specific predefined setting of Contrast,
Colour, Sharpness and Dyn. Contrast.
When in VGA mode, displaying information
from your computer you can select: Graphics,
Each time it is pressed, a different sound
setting is selected, corresponding with a
specific predefined setting of Treble, Bass
Personal refers to the personal preference
setting of picture and sound which you have
stored with Store PP in the Features menu,
The smart picture and sound settings are set
to Manual until the personal adjustments are
stored and you switched off the TV and on
8
EXT1,
, according to
VGA
(see p. 21).
active.
See p. 15
See p. 15
Smart Keys
settings.
Smart Picture
Text, Fine Text
Smart Sound
or Loudness.
p. 13.
again.

Use of the remote control

TV
VCR 1 TUNER
u
VCR 2 TAPE
SAT DCC
M AMP CD
B
TV
OK
ZOOM
π
π
+ +
V
P
- -
¬
1 2 3
b
q 4 5 6
7 8 9
PICTURE
SMART
i
0 0
SOUND
b
æ
B
Standby
The TV set is switched off and the red
indicator lights up.
To switch the TV on again, press - P + or the
digit keys.
Your TV consumes energy in the standby mode.
Energy consumption contributes to air and water
pollution. We advise to switch off your TV
overnight instead of leaving it on standby. You
save energy.
P
Programme selection
To browse through the TV channels activated
in the Favourite Programme menu. See p. 6.
V
Volume
The volume is adjusted. If you want to store
the volume adjustment in the memory, see
the Features menu, Store PP, p. 13 to store
the same volume adjustment for all the
stored TV channels.
¬
Mute key
Temporarily interrupt the sound or restore it.
0/9
Digit keys
To select a TV channel.
For a two digit programme number, enter the
second digit within 2 seconds.
0
Previous programme
The previously selected TV channel is
displayed.
i
Screen information
Press for 5 seconds to activate/de-activate
extended or reduced display of TV channel
and programme information on the screen.
Press briefly to display information about the
selected TV channel and programme, the
sound reception, the selected DNR setting
and picture format and the remaining time set
with the sleeptimer.