Motorola Netopia 2200 Administrator's Handbook page 204

Administrator's Handbook
set system heartbeat option { on | off }
protocol [ udp | tcp ]
port-client [ 1 - 65535 ]
ip-server [ ip_address | dns_name ]
port-server [ 1 - 65535 ]
url-server (" server_name ")
number [ 1 – 1073741823 ]
interval (00:00:00:20)
sleep (00:00:30:00)
contact-email (" string @ domain_name ")
location (" string "):
The heartbeat setting is used in conjunction with the configuration server to broadcast contact and
location information about your Gateway. You can specify the protocol, port, IP-, port-, and URL-
server.
◆
The interval setting specifies the broadcast update frequency. Part of sequence control. The inter-
val is the spacing between heartbeats, in d:h:m:s.
◆
contact-email
The
administrator.
◆
location
The setting is a text string allowing you to specify your geographical or other location, such
as "Secaucus, NJ."
◆
number
The setting is part of the sequence control. This is the number of heartbeats to send, at
each "interval", before sleeping. For example, if this is 20, in the above layout, each heartbeat
sequence will send out a total 20 heartbeats, spaced at 30 second intervals, and then sleep for 30
minutes. So to have the Gateway send out packets "forever", this number can be set very high. If it
is 1440 and the interval is 1 minute, say, the heartbeat will go out every minute for 1440 minutes,
or one day, before sleeping.
◆
The sleep setting is part of sequence control. This is the time to sleep before starting another
heartbeat sequence, in d:h:m:s.
set system ntp
option [ off | on ]:
server-address (north-america.pool.ntp.org)
alt-server-address (pool.ntp.org):
time-zone [ -12 - 12 ]
update-period (60) [ 1 - 65535 ]:
auto-daylight-savings option [ off | on ]
auto-daylight-savings override option [ off | on ]
Specifies the NTP server address, time zone, and how often the Gateway should check the time from
the NTP server. The NTP server-address and alt-server-address can be entered as DNS names as
well as IP addresses. NTP time-zone of 0 is GMT time; options are -12 through 12 (+/- 1 hour incre-
ments from GMT time). update-period specifies how often, in minutes, the Gateway should update the
204
setting is a quote-enclosed text string giving an email address for the Gateway's
start-year [ 0 - 99 ]
start-month [ 1 - 12 ]
start-day [ 1- 31 ]
start-hour [ 0 - 23 ]
end-year [ 0 - 99 ]
end-month [ 1 - 12 ]
end-day [ 1 - 31 ]
end-hour [ 0 - 23 ]