Setting Up Your Motorola Netopia; Gateway; Chapter 1 Setting Up Your Motorola Netopia ® Gateway; What's New In 7.8.4 - Motorola Netopia 2200 Administrator's Handbook

CHAPTER 1
This Administrator's Handbook covers the advanced features of the Motorola Netopia
and 7000-Series Gateway family.
®
Your Motorola Netopia
based interface screens and the Command Line Interface (CLI). This Administrator's Handbook docu-
ments the advanced features, including advanced testing, security, monitoring, and configuration. This
Administrator's Handbook should be used as a companion to the User Manual . You should read the
User Manual before reading this Administrator's Handbook .
This guide is targeted primarily to residential service subscribers.
Expert Mode sections and the Command Line Interface may also be of use to the support staffs of
broadband service providers and advanced residential service subscribers. (See
page 55" and "Command Line Interface" on page
Most users will find that the basic Quickstart configuration is all that they ever need to use. This sec-
tion may be all that you ever need to configure and use your Motorola Netopia
instructions cover installation in Router Mode .
◆
"Important Safety Instructions" on page 8
"Wichtige Sicherheitshinweise" on page 9
◆
"Set up your Gateway" on page 10
◆
"Configure Your PC for Dynamic Addressing" on page 11
◆
"Motorola Netopia® Gateway Quickstart" on page 14

What's New in 7.8.4

◆
LAN/WAN Turnaround is now supported on all models. See
◆
VDSL2 WIAD Voice support. See
◆
Configurable SIP forwarding path via CLI. See
◆
VDSL2 Modem firmware Set IP Gateway command. See

Setting up Your Motorola Netopia

Gateway

equipment offers advanced configuration features accessed through the Web-
"VoIP" on page
123.")
"LAN/WAN" on page
81.
"VoIP settings (supported models)" on page
"Default IP Gateway Settings" on page
®
®
2200- 3300-
"Expert Mode" on
®
Gateway. The following
63.
221.
164.
7