NEC Express5800 series User Manual page 30

Custom Configuration
You can determine the configuration by specifying in detail the physical drives to be used and the
logical drive to be created. Select [Custom], and click on [Next]. A screen as shown below appears.
Select the drive to configure the array and click on [Add to Array]. You cannot add a drive to an
existing array while running the Wizard.
Select the drive for hot spare and click on [Add Spare] to add Hot Spare drives.
Even if it creates a hot spare and completes Wizard, it may not be displayed on a screen.
In that case, please click [Rescan].
Click on [Accept Array] if you approve the suggested configuration.
Click on [Reclaim] to clear the last configured array.
Click on [Next] to accept the proposed configuration. Follow the on-screen instructions to complete
the configuration process.
It is satisfactory although the following logs may be registered at the time of creation of an
array.
Source: MegaServ
ID: 6107
Description: CheckConsistency is COMPLETED.
– –
27