NEC Express5800 series User Manual page 47

Express5800 series

Hide thumbs Also See for Express5800 series:

Table of Contents

Step 2

Select a physical drive in the

Ready status.

Click on [Add to Array]

button to assign physical

drives to the new array.

Click on [Accept Array]

button, and then click on

[Next] button.

NOTE:: Assign all physical disks used to configure a logical

disk to [New Array]. For example, to configure the array of

RAID5 level, at least three physical drives are required.

Step 3

Specify the RAID level and

size of the logical drives.

Click on [Accept] button, and

then [Next] button.

Click on [Advanced] button if

you want to set the advanced

parameter (e.g., write policy).

–

Table of Contents

Power console plus