Appendix C Standby/Hibernation Lock
Installing Standby/Hibernation Lock disables the system to be entered into the standby or
hibernation state. In any environment using N8103-101/N8103-103 RAID system, the
Standby/Hibernation Lock feature is not supported. Be sure to install the Standby/Hibernation
Lock in the following procedure. Before the Standby/Hibernation Lock can be uninstalled,
whether the driver is used by another software must always be checked.
Installation
Install the Standby/Hibernation Lock in the following procedure.
1. Log on the system with an account having the administrator authority (such as
administrator).
2. Before starting the installation, exit from all applications being executed.
3. For the Windows x64 Editions (64-bit OS) environment, start
"\WEBPAM\ACPIDV64\EXPLOCK.BAT" in the attached CD-ROM. For other
Windows environments, start "\WEBPAM\ACPIDV32\PAM_INST.BAT" in the
attached CD-ROM.
A dialog box indicating no driver signature may appear on the way as shown below.
Select [Yes] if it appears.
The following message appears on the command prompt.
Driver Installed successfully.
Now the installation is completed.
-
-
65