Table of Contents
Advertisement
"Main" Menu Settings (part 3)
Media
Select the type of paper to be used. Select from "Plain",
"Coated", "Photo", "Transparency", "T-shirt transfer", and
"Card Stock". Insert the paper that was selected into the tray.
For more information on various paper types, refer to the
following table.
Media
Description
Plain
Normal office paper
(copier paper and high
quality paper)
Coated
The print side of coated
paper is whiter.
Photo
The print side of photo paper
is glossy.
Transparency
Overhead presentation on
clear film. The print side of
transparency film is rougher.
T-shirt transfer
This media is to be
transferred to cloth materials
by an iron.
Card Stock
Thick plain paper
! Be sure to use Sharp recommended OHP films when you
select "Transparency".
! If you select "T-shirt transfer", the original image will be
reversed on the printed media to make a proper image on
the T-shirt.
! When "Card Stock" is selected, be sure to turn the paper
knob to (
) setting to feed the thicker card stock.
! Depending on this "Media" setting, some of the "Print
Quality" settings cannot be selected.
How to Use the
Online Manual
Media Usage
Corporate documents
Graphics, Images
Photographs
Overhead
presentations
T-shirt, Place mat
Card printing
Printer Properties
Paper Selection
Select "Tray" or "Bypass" for your print job.
Tray
Paper is fed to the printer from the paper tray.
If the "Tray" is selected from this menu and paper is placed
in the bypass tray, the paper in the bypass tray will be fed
first, and then paper will be fed from the paper tray.
Bypass
Paper will be fed to the printer from the bypass tray. Only one sheet can
be loaded into the bypass tray. To load paper into the bypass, align the
paper with the right side of the bypass and press the paper button.
When printing one page:
Load paper into the bypass then start printing from your computer. If
paper is not loaded before printing is started, the paper lamp on the
printer will blink and the message "Please set a sheet of paper on
bypass" will appear on the screen of the computer.
When printing more than one page:
Repeat as above for each page.
Make sure to insert "Banner Letter" and "Banner A4"
through the bypass tray. Max. 5 sheets of banner paper can
be set to the bypass tray.
Print
Maintenance
Printer Properties
10
Troubleshooting
Advertisement
Table of Contents
