Table of Contents
Advertisement
PLAYING A DISC
Marker Setup Screen
DVD
Use markers to memorise your favourite places on a disc.
1
Press
MARKER during playback.
• The display screen and Markers will appear on the TV
screen.
2
Press s or B to select a Marker (1 ~ 10), and ensure
that "- : - - : - -" appears in the display.
3
When it reaches the desired point, press ENTER.
• Selected number will turn to
marked.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4
To return to the Marker later, press MARKER during
playback and s or B to choose the desired marker (one
of the
mark), then press ENTER.
NOTES:
• Opening the disc tray or turning off the power or select AC
2
(All Clear) at step
Markers.
• To clear a marker, using s or B, position the cursor on
to the marker number to be cleared and press
CLEAR/C-RESET.
• You can mark up to 10 points.
5
Press MARKER or RETURN to exit.
Digital Gamma Setting
DIGITAL GAMMA is a digital image quality enhancement
function that gives a richer image by brightening the darker
and more obscure portions of the image without altering the
brightness of the brighter portions thereby making the entire
DVD SETUP
Audio Setting
Choose appropriate settings for best sound reproduction
dependent on your externally connected equipment. These
settings only affect DVD playback.
1
Press SETUP in STOP mode.
2
Press s or B to select
TOM), then press ENTER.
• On screen menu will appear.
3
Press s or B to select
(AUDIO), then ENTER to confirm.
4
Press K or L to select the items below, then press
ENTER.
DRC (Dynamic Range Control) :
• Choose ON to compress the
range of sound volume.
• The default setting is ON.
• DRC function is available only on
the discs recorded in the Dolby Digital format.
DOWN SAMPLING :
• Choose ON to set down sampling to 48kHz.
• Choose OFF when outputting in the original sound.
• The default setting is ON.
• When playing a disc with copyright protection, the
sound will be down sampled at 48kHz even if you set it
to OFF.
• DOWN SAMPLING function is available only on digital
output of a disc recorded in 96kHz, and when the unit is
connected to another source using the digital out jack.
CD
DVD-RW
VR mode
and the point will be
and press ENTER will erase all
DVD
DVD-RW
VR mode
(CUS-
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
DTS
MPEG
AUDIO
DRC
DOWN SAMPLING ON
DOLBY DIGITAL
DTS
MPEG
image easier to see. Three digital gamma settings are avail-
able to allow for differences in the images played and in
VCD
brightness of the room.
without PBC function
1
Press
GAMMA during playback.
• The current setting appears.
2
Press ENTER to switch 1,2,3,OFF.
1,2,3 : Makes the dark parts brighter.
OFF : Shows the original picture as recorded.
3
Press GAMMA or RETURN to exit.
NOTES:
• The setting will be saved even if the VCR/DVD is
turned off.
• This function cannot be used during Rapid Play.
(Refer to page 20.)
Virtual Surround
DVD
You can enjoy surround sound effect over two speakers.
1
Press MODE repeatedly until the
Virtual Surround screen appears.
2
Press ENTER to set it to 1
(Natural effect), 2 (Emphasised
effect) or OFF.
3
Press MODE or RETURN to exit.
NOTES:
• The setting will be saved even if the VCR/DVD is
turned off.
VCD
• The setting will not be effective unless the sound mode
is set to STEREO. (for CDs or Video CDs only)
• Turn down the level or turn it "OFF" if the sound is dis-
torted.
• This function cannot be used during Rapid Play.
(Refer to page 20.)
• DOWN SAMPLING function is available only on the
discs recorded in the Dolby Digital format.
DOLBY DIGITAL :
Set to BITSTREAM when the VCR/DVD is connected to
Dolby Digital Decoder.
(BITSTREAM : Output by Dolby Digital)
(DPCM : Convert the Dolby Digital to PCM)
• The default setting is BITSTREAM.
ENGLISH
• You can also adjust the setting from
4:3 LETTER BOX
BITSTREAM
OFF
DPCM
menu.
DTS :
Set to BITSTREAM when the VCR/DVD is connected to
DTS Decoder.
(BITSTREAM : Output by DTS)
• The default setting is OFF.
• You can also adjust the setting from
ON
menu).
BITSTREAM
OFF
DPCM
MPEG :
Set to BITSTREAM when the VCR/DVD is connected to
MPEG Decoder.
(BITSTREAM : Output by MPEG)
(DPCM : Convert the MPEG to PCM)
• The default setting is DPCM.
• You can also adjust the setting from
setup menu.
5
Press SETUP to exit.
– 26 –
CD
MP3
DVD-RW
VR mode
1
VCD
OFF
(QUICK) setup
(QUICK setup
(QUICK)
EN
Advertisement
Table of Contents
