Installing The Docking Board; Removing The System Board - Dell Mobile Venue Owner's Manual

5. Remove the docking board from the computer and disconnect the home-button board cable.

Installing the Docking Board

1. Connect the home-button board cable to the docking board and place the docking board in its slot in the computer.
2. Tighten the screws to secure the docking board to the computer.
3. Connect the docking board power flex cable to the connector.
4. Install the:
a) front camera
b) speaker
c) WWAN Card
d) SmartCard reader
e) base cover
f) battery
5. Follow the procedures in

Removing the System Board

1. Follow the procedures in
2. Remove the:
a) battery
b) base cover
c) SmartCard reader
d) WWAN card
e) speaker
After Working Inside Your Computer .
Before Working Inside Your Computer .
23