D-Link DPR-2000 Manual page 25

Using the PS Software
After the configuration of these screens is complete, click Save to store the settings
that are displayed, or Cancel to abort. You can also click < Back to modify these
settings.
[Change IP Address] - Click this button to bring up the following screen. This
screen allows you to change the IP Address of the Print Server. Select Manually
Assign to enter a specific IP address for the Print Server, or DHCP Assign
Automatically to have an IP address automatically assigned to the Print
Server. Click OK to save your changes, or Cancel to abort.
D-Link DPR-2000 - User Manual 20