Table of Contents
Advertisement
This configuration will work properly with a cable modem provider that does not require authentication.
Back to Top
Cable Modem with name settings
1. Connect the Ethernet port on the Cable modem to the Internet port on the router via an Ethernet cable.
2. Connect any one of the four LAN port on the router to the Ethernet port on your computer via another Ethernet cable. (Connect to the
router from your PC with a wireless network adapter.)
3. Power on the router
4. Open your web browser and go to http://my.router, (or the default address http://192.168.2.1.)
5. Click the Basic Settings tab on the top navigation bar.
6. Click the CABLE/xDSL ISP Settings tab on the left navigation bar.
7. Check the Your ISP requires you to input Host Computer Name or Domain Name box.
8. Enter the Host Name and Computer Name assigned to you into the appropriate boxes.
9. Click the Next button.
10. Click the Save & Restart button to store the new settings.
11. Note the status bar at the bottom of the screen.
12. While the Wireless Broadband Router resets, the Power light on the front of the unit blinks.
13. When your web browser returns to the main page of the Wireless Broadband Route, the device has successfully restarted with the
new settings.
Back to Top
Cable Modem with other settings
If your Cable service provider requires you to enter other settings for your Internet Broadband connection, reference the steps in
Modem with name settings
values by your ISP.
Back to Top
Back to Contents Page
to go to the CABLE/xDSL ISP Settings page and check only the appropriate field box and enter the required
Cable
Hide quick links:
Advertisement
Table of Contents
