About Your System; Front-Panel Features And Indicators - Dell PowerVault DX6112 Owner's Manual

About Your System

Front-Panel Features And Indicators

Figure 1. Front-Panel Features and Indicators
Item Indicator, Button, or
Connector
1 Diagnostic indicators
2 System identification button
3 Power-on indicator, power
button
4 NMI button
Icon Description
The diagnostic indicators light up to display error status.
The identification buttons on the front and back panels
can be used to locate a particular system within a rack.
When one of these buttons is pressed, the system status
indicator on the back flashes until one of the buttons is
pressed again.
Press to toggle the system ID on and off.
If the system stops responding during POST, press and
hold the system ID button for more than five seconds to
enter BIOS progress mode.
To reset the iDRAC (if not disabled in F2 iDRAC setup)
press and hold the button for more than 15 seconds.
The power-on indicator lights when the system power is
on. The power button controls the power supply output to
the system.
NOTE: On ACPI-compliant operating systems, turning
off the system using the power button causes the
system to perform a graceful shutdown before power
to the system is turned off.
Used to troubleshoot software and device driver errors
when running certain operating systems. This button can
be pressed using the end of a paper clip.
1
9