Fujitsu BX600 User Manual page 37

Feature
MAC address
Multivendor teaming
*1: Some switches require matching link speeds to correctly negotiate between trunk
connections.
*2: Make sure that Port Fast or Edge Port is enabled.
• Dynamic Trunking
Feature
User interface
Number of teams
Number of adapters per team
Hot replace
Hot add
Hot remove
Link speed support
Frame protocol
Incoming packet management
Outgoing packet management
Failover event
Failover time
Fallback time
MAC address
Multivendor teaming
*1: Make sure that Port Fast or Edge Port is enabled.
Speeds Supported for Each Type of Team
The various link speeds that are supported for each type of team are listed in "• Link Speeds in
Teaming" ( pg.137). Mixed speed refers to the capability of teaming adapters that are running at
different link speeds.
• Link Speeds in Teaming
Type of Team
SLB
FEC
GEC
IEEE 802.3ad
Same for all adapters
Yes
Broadcom Advanced Control Suite 2 (BACS2)
Maximum 4
Maximum 8
Yes
Yes
Yes
Different speeds
All
Switch
BASP
Loss of link only
<500 ms
(*1)
1.5 s
Same for all adapters
Yes
Link Speed
10/100/1000 Incoming/outgoing
100 Incoming/outgoing
1000 Incoming/outgoing
10/100/1000 Incoming/outgoing
Attribute
Attribute
(approximate)
Traffic Direction
Mixed speed
Same speed
Same speed
Mixed speed
4 Broadcom Gigabit Ethernet Teaming Services
Speed Support
E
137