Screw Identification - Dell Inspiron X200 Service Manual

1 back
2 right
3 front
4 left

Screw Identification

When you are removing and replacing components, photocopy the placemat as a tool to lay out and keep track of the screws. The placemat provides the
number of screws and their sizes.
NOTICE: When reinstalling a screw, you must use a screw of the correct diameter and length. Ensure that the screw is properly aligned with its
corresponding hole, and avoid overtightening.
Keyboard: Palm Rest:
(6 each) (4 each)
Display Assembly: Keyboard Tray:
(2 each) (7 each)
Hard Drive: System Board:
(3 each) (4 each)