Picture Tab; Audio Codec; Mic Volume; Audio Upload - Sony Ipela SNC-EP520 User Manual

Auto: The focus is automatically adjusted.
Manual: The focus can be adjusted by using the
and
displayed in the main viewer.

Audio codec

Select whether you are going to send audio from the m
microphone input connector. Select On to send the
audio from the network camera.
Note
When you change the Audio codec setting, click
Refresh on the Web browser to reflect the change on the
opening main viewer page.

Mic volume

Set the volume level of the audio input from the m
microphone input connector. It is adjustable from –10 to
+10.
Codec
Select the bit rate of audio from the m microphone input
connector. G.711 (64kbps), G.726 (40kbps), G.726
(32kbps), G.726 (24kbps) or G.726 (16kbps) can be
selected.
Note
No audio is output if JPEG or JPEG/Flash is used for the
Plug-in free viewer.
Dynamic range compressor
Select On to use dynamic range compressor.

Audio upload

Using SNC audio upload tool stored in the supplied
CD-ROM, you can output audio that is input to the
computer's audio input terminal from a powered speaker
connected to the line output jack of the camera.
Select On to output audio from the speaker.
Volume
Set the speaker volume level from – 10 to + 10.
OK/Cancel
See "Buttons common to every menu" on page 35.
44
Setting the Camera Image and Audio — Camera Menu
,
buttons of the control panel

Picture Tab

You can set the color condition, exposure, etc., of the
camera.
Display sample: SNC-EP520
Preview screen
This screen is for monitoring images and configuring
image settings.
For the details of each button, please refer to the Control
bar of the Plug-in free viewer (page 25).
Exposure
Select the exposure mode of the camera.
The setting items required for the selected mode become
active.
Full auto: The camera performs the gain and iris
adjustment automatically. In this case, the shutter
speed is fixed. (1/60 sec. for NTSC or 1/50 sec. for
PAL).
When this option is selected, Slow shutter and
Backlight compensation become active.
Shutter priority: The camera performs the gain
adjustment and iris adjustment automatically and
you can select the shutter speed. When this option is
selected, Shutter speed becomes active.