Cable Management Arm (Cma); Figure 44. M1000E Versarails Static Rails - Dell PowerEdge M1000e Technical Manual

Dell
The VersaRails static rails are not intended to be mounted in threaded hole racks since the rails
cannot be fully tightened and secured against the rack mounting flange. Neither the VersaRails nor
the RapidRails kits support mounting in 2-post racks.
Mounting Rail
Interface Type
Square Round Thread Flush Center Min
RapidRails Static
VersaRails Static
The min-max values listed in the table above represent the allowable distance between the front and
rear mounting flanges in the rack.

12.3 Cable Management Arm (CMA)

Since the M1000e does not need to be extended out of the rack for service, neither the RapidRails
nor the VersaRails static rail systems support a cable management arm. Included instead are a strain
relief bar and cable enumerator clips to help manage and secure the potentially large number of
cables exiting the back of the system.
PowerEdge M1000e Technical Guide

Figure 44. M1000e VersaRails Static Rails

Rack Types Supported
4-Post
X X
√
X
√ √
Rail Adjustability Range (mm)
2-Post Square
X X 712
X X 706
Round Threaded
Max Min Max Min
755 — —
755 706 755
Max
— —
— —
54