Figure 51. Chassis Management Controller - Dell PowerEdge M1000e Technical Manual

Technical guide

Hide thumbs Also See for PowerEdge M1000e:

Table of Contents

Dell

o SNMP

The Integrated Dell Remote Access Controller (iDRAC) on each server module is connected to the

CMC via dedicated, fully redundant 100 Mbps Ethernet connections wired through the midplane to a

dedicated 24‐port Ethernet switch on the CMC, and exposed to the outside world through the CMC's

external Management Ethernet interface (10/100/1000M). This connection is distinct from the three

redundant data Fabrics A, B and C. Unlike previous generations of Dell server modules, the iDRAC's

connectivity is independent of, and in addition to, the onboard GbE LOMs on the server module. Each

server module's iDRAC has its own IP address and can be accessed, if security settings allow, directly

through a supported browser, telnet, SSH, or IPMI client on the management station.

Figure 51. Chassis Management Controller

PowerEdge M1000e Technical Guide

Table of Contents