General Information; Feature Usage; Call Progress Tones; Internal Dial Tone - Fujitsu F9600 F9600c User Manual

GENERAL INFORMATION

FEATURE
USAGE
CALL
PROGRESS
TONES
Internal Dial
Tone
External Dial
Tone
Recall Dial
Tone
A Flash is required in order to use many of the
F9600/F9600c features. Firmly press and release
the hookswitch to Flash. The timing defaults for
holding down the hookswitch (the button that is
pressed when the handset is placed on the
handset cradle) are programmed into the system
software. The following can occur:
• The call may disconnect if you hold the
hookswitch down too long (over 1-1/2
seconds).
• The feature may not be activated if you do not
hold down the hookswitch for a long enough
time (at least a 1/2 second).
There are several different call progress tones
generated by the F9600/F9600c system that you
hear on your telephone receiver. They indicate the
following:
• Feature availability.
• Feature registration or cancellation
acceptance.
• Call waiting.
Internal dial tone is the continuous humming that
you hear when you lift the handset. This tone
indicates that you may begin dialing.
External dial tone is heard when you lift the
handset and dial a code for an outside line. This
tone indicates that you can place an outside call.
Recall dial tone occurs after you press Flash
during a conversation. The tone is three short
beeps followed by internal dial tone. This shows
that you have accessed the system correctly. You
can now dial a feature code.
3