Table of Contents
Advertisement
To install the AC adapter in the cradle base,
1.
Turn the cradle base upside down.
2.
Detach one end of the Velcro strap and insert the AC adapter into the cavity in the bottom of the
cradle base as shown in Figure 2-11.
3.
Reattach the velcro strap to secure the AC adapter.
4.
Attach the DC power cable from the AC adapter to the DC input connector on the cradle module.
5.
Coil the DC supply cable of the AC adapter into "figure-eight" loops as shown in Figure 2-11 and tie
the coiled cable using the tie wrap provided. Ensure that there is enough slack in the cable to allow
the cradle module to pivot to the fully tilted position.
The cradle is now ready for installation at the work site.
Cutouts
(for cable routing)
Mouse
Port
Cutouts (for cable routing)
Velcro
Strap
2-16
Assembling and Installing Connectivity Peripherals
Serial Port A
Keyboard
Serial Port B
Port
DC Input
Power Port
Figure 2-11. High-Connectivity Cradle Bottom View
Floppy Disk Port
Mouse Port
Parallel Port
Cutouts (for cable routing)
(Tie excess cable here.)
Mounting Holes
AC Adapter
AC Power Cable
Cutouts
(for cable routing)
Video Port
Advertisement
Table of Contents
