D-Link DI-824VUP+ 2.4GHz Wireless VPN Router and Print Server Quick Installation Manual page 5

Connecting Additional Computers To The
DI-824VUP+ 2.4GHz Wireless VPN Router
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped
computers to the remaining Ethernet LAN ports on the back panel of the DI-824VUP+.
Status LED – a steady
blinking light indicates
that the unit is working
properly.
POWER LED – a solid
light indicates a proper
connection to the
power supply.
WAN LED – a blinking light
indicates connection on the
WAN port. This LED blinks
during data transmission.
USB and LPT LEDs – a
solid light indicates a proper
connection to a Printer.
WLAN LED – will flash
consistently to indicate
that the DI-824VUP+ is
working properly.
5
COM LED – a solid
light indicates a proper
connection to a dial-up
modem.
LOCAL NETWORK LEDs – a
solid light on the port indicates
a connection to an Ethernet
enabled computer on ports 1-4.
This LED blinks during data
transmission.