AEG Voxtel C115 User Manual page 9

Press the OK button
Continue with programming, or press the stop button
8.4 LCD contrast
Press the menu button
>The display shows "OPTIONS MENU".
Press the up or down
Press the OK button
Press the up or down
setting is 3.
Press the OK button
Continue with programming, or press the stop button
8.5 Message length
To set the maximum recording time for each incoming message or memo message on the answering
machine.
Press the menu button
>The display shows "OPTIONS MENU".
Press the up or down
Press the OK button
Press the up or down
>The default setting is 2 minutes.
Press the OK button
Continue with programming, or press the stop button
8.6 Rings to answer
To set the number of rings before the machine answers a call.
Press the menu button
>The display shows "OPTIONS MENU".
Press the up or down
Press the OK button
Press the up or down
"9" rings.
>The default setting is 5.
>Use "TOLL SAVER" when checking your Voxtel C115 for messages from a remote location using
a long distance service or from a pay phone. The answering machine responds after the 2nd ring
only if you have a new message recorded. If there are no new messages, the phone will answer
after the 4th ring. You can then hang up after the 3rd ring to avoid paying for the call.
Press the OK button
Continue with programming, or press the stop button
8.7 Remote access
The remote access requires a three-digit code that you need to enter if you call when away from home
to check your messages. The default is "321". You can change it to any three digits you want.
Press the menu button
>The display shows "OPTIONS MENU".
Press the up or down
Press the OK button
>The current three-digit code is shown, with the first digit blinking.
Press the up or down
Press the OK button
>The second digit of the code will be blinking.
Press the up or down
to confirm.
.
button until de display shows "LCD CONTRAST".
to confirm.
button to select your comfortable display viewing level (1-5). The default
to confirm.
.
button until de display shows "MESSAGE LENGTH".
to confirm.
button to select 1 or 2 minutes.
to confirm.
.
button until de display shows "RINGS TO ANSWER".
to confirm.
button to select "TOLL SAVER", "2", "3", "4", "5", "6", "7" , "8" or
to confirm.
.
button until de display shows "REMOTE ACCESS".
to confirm.
button to set the first digit of the remote access code.
to confirm.
button to set the second digit of the remote access code.
to return to standby mode.
to return to standby mode.
to return to standby mode.
to return to standby mode.
8