Installation
nDisassembling the stand
1. Remove the bottom cover.
Push the tabs in towards the center and pull.
Bottom cover
2. Remove the back from the front.
Depress the button on the front and slide the back across,
then pull the back up.
Button
Front
Pen writing position
Place the monitor at an angle on a table or other level surface.
1. Hold the flap by the depression on the back of the
monitor and pull the flap up.
Depression
2. Place the monitor where you want to use it.
Caution
• Do not exert a large amount of force on the monitor from
above. Doing so may damage the flap.
12
E
Tabs
Back
Horizontal position
Place the monitor on a table or other level surface.
Caution
• When using the monitor horizontally, use the horizontal tab
in the upright position.
1. Lift up the two tabs on the back of the monitor.
2. Place the monitor where you want to use it.
Caution
• Do not exert a large amount of force on the monitor from
above. Doing so may damage the tabs.