Sharp LL-S201A Operation Manual page 25

nSupported frequency
Resolution
640×480
800×600
1024×768
720×480p
1280×720p
1920×1080p
720×576p
* All are compliant only with non-interlaced.
* Each is scaled to 16:9 and displayed using the full screen.
* Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is
input.
nDDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters
is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect
plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.
HDMI input terminal pins
n
TM
(HDMI Connector)
No. Function
1 TMDS data 2+
2 TMDS data 2 shield
3 TMDS data 2-
4 TMDS data 1+
5 TMDS data 1 shield
6 TMDS data 1-
7 TMDS data 0+
8 TMDS data 0 shield
9 TMDS data 0-
10 TMDS clock+
Frame rate
60Hz
60Hz
60Hz
59.94/60Hz
50/59.94/60Hz
50/59.94/60Hz
50Hz
No. Function
11 TMDS clock shield
12 TMDS clock-
13 CEC
14 N.C.
15 SCL
16 SDA
17 DDC/CEC GND
18 +5V
19 Hot-plug detection
Remarks
VGA
SVGA
XGA
nDisplayPort input terminal pins
(DisplayPort 20 pin)
No. Function
1 MainLane 3-
2 Gnd
3 MainLane 3+
4 MainLane 2-
5 Gnd
6 MainLane 2+
7 MainLane 1-
8 Gnd
9 MainLane 1+
10 MainLane 0-
Specifications
No. Function
11 Gnd
12 MainLane 0+
13 Gnd
14 Gnd
15 Aux +
16 Gnd
17 Aux -
18 Hot-plug detection
19 Gnd
20 3.3 V
25
E