GE JV936 Operating Instructions Manual page 10

Installation Instructions
TOOLS AND MATERIALS REQUIRED
(NOT SUPPLIED)
Pencil and tape
measure
Phillips and
Flat blade
screwdirvers
Duct tape
1/4" pivoting hex
socket
Electric drill with 1/8" and
3/8" bits
Spirit level
€ o@
Flashlight
Safetg glasses
UL Listed Wire nuts
Pliers
Wire Cutter/
Stripper
Ladder
Hammer
Tin Snips
Saber saw or Keg Hole Saw
Allen Wrench
Additional Materials:
, 120V 60Hz, 15 or 20 Amp, 2 wire with ground.
Properlg grounded branch circuit.
, Strain relief for junction box.
, 7" round metal duct, 5-1/4" x 10" rectangular duct
or 3-1/4" x 12" rectangular duct length to suit
instollotoin.
REMOVE THE PACKAGING
, Remove the small box housing the motor.
, Lift the hood out of the box.
Wood
Mounting
Support
Hood ""
, ,,,1117
i
u s t /
u s
i s J
Notor , ,' ," Parts
I ,',,, Package
u............ 2 ," t
, ............... , J_ .............. i
Shipping Carton
Remove shipping screws holding the wood mounting
piece to the back side of the hood. Set aside wood
mounting piece and screws for later installation. Do
not discard.
, Remove the "V" shaped carton insert.
, Remove parts package from the "V" shaped
cardboard insert.
, Removejunction box cover and knockout.
, Install strain relief onto back or top of hood.
, Remove all tope and packing material from the hood
duct transition and motor.
10