Table of Contents
Advertisement
18
en | Operation
6.3.2
Detection of a MIYS37E Wristband Transmitter
alone
Device behavior
–
When a MIYS37E transmitter is detected:
–
–
–
During these 30 seconds, all radio reception is fully blocked.
This allows a person wearing the MIYS37E to cross the
monitored area without generating an accompany signal.
6.3.3
Detection of a MIYS37L Wristband Transmitter
with a MIYS37E Wristband Transmitter nearby
Device behavior
–
When a MIYS37L transmitter and a MIYS37E transmitter are
detected by the monitored area:
–
–
–
When the MIYS37E transmitter sends its signal (approx. 4
seconds after the MIYS37L):
–
–
–
After the detection of the MIYS37E transmitter, all radio
reception is fully blocked during 30 seconds. This allows a
person wearing the MIYS37E transmitter to accompany a
person wearing the MIYS37L transmitter through the monitored
area without generating an accompany signal.
F.01U.278.517 | V2.0 | 2012.11
The green LED stays permanently on.
The red LED lights up permanently for 30 seconds.
Relay 1 stays off for 30 seconds.
Relay 2 switches on for 25 seconds.
The green LED stays permanently on.
The red LED lights up permanently.
Relay 1 switches on until the MIYS37E transmitter is
detected.
1 second after Relay 1, Relay 2 switches on for 3 seconds.
The red LED lights up permanently for 30 seconds.
Relay 1 switches off for 30 seconds.
Relay 2 stays on for another 25 seconds.
User Manual
LE10 Radio Receiver
Bosch Security Systems
Advertisement
Table of Contents
