Whirlpool 11-0086-11 Owner's Manual page 28

Keypad Introduction
Plus Key
OK Key
Light Key Pump 4 Key
Pump Keys Minus Key
Pump 5 Key
Program Key
Standby Key
Key / Function
STANDBY KEY
Standby Mode: When this feature is activated, it allows all pumps to stop
at the same time by a simple click of a button! Use the On/Off key to pause
all pumps. Progress bar will display the remaining time before the system
automatically exits Standby Mode (user can also exit Standby Mode at any
time by pressing again the On/Off Key). In order to warn the user, the spa
light will flash for a few seconds before the exit of Standby Mode and restart
the pumps. The "Stby" message is also displayed during Standby Mode.
PUMP 1 KEY
- Press Pump 1 key to turn Pump 1 on at high speed. Press a second time
to turn Pump 1 off. A built-in timer automatically turns pump off after 20 min-
utes, unless pump has been manually deactivated first.
PUMP 2 KEY
- Press Pump 2 key to turn Pump 2 on at high speed. Press a second time
to turn Pump 2 off. A built-in timer automatically turns pump off after 20 min-
utes, unless pump has been manually deactivated first.
PUMP 3 KEY
- Press Pump 3 key to turn Pump 3 on at high speed. Press a second time
to turn Pump 3 off. A built-in timer automatically turns pump off after 20 min-
utes, unless pump has been manually deactivated first.
23