Whirlpool 11-0086-11 Owner's Manual page 29

Key / Function
PUMP 4 KEY
Press Pump 4 key to turn Pump 4 on at high speed. Press a second time
-
to turn Pump 4 off. A built-in timer automatically turns pump off after 20 min-
utes, unless pump has been manually deactivated first.
PUMP 5 KEY
- Press Pump 5 key to turn Pump 5 on at high speed. Press a second time
to turn Pump 5 off. A built-in timer automatically turns pump off after 20 min-
utes, unless pump has been manually deactivated first.
LIGHT KEY
- Press Light key to turn light on at high intensity. Press a second time to turn
light off. A built-in timer automatically turns pump off after 20 minutes, unless
pump has been manually deactivated first.
+ / -
KEYS
- Use (+) or (-) key to set desired water temperature. The temperature set-
ting will be displayed for 5 seconds to confirm your new selection.The "Set
Point" icon indicates that the display temperature shows the desired tem-
perature, NOT the current water temperature.
PROGRAM KEY
Use program key to display time or enter Programming menu by pressing
and holding key. In Programming mode, the following parameters can be
set: time, filter's cycle start time, duration and frequency. Also, Economy
mode's start time as well as its end time and finally, the choice of tempera-
ture display unit.
24