Download
Share
Print this page
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Server
  5. 9000 rp7420
  6. Specification

HP 9000 rp7420 Specification

Hide thumbs Also See for 9000 rp7420:

Advertisement

Quick Links

Download this manual See also: Service Manual, Installation Manual
QuickSpecs
Overview
The Flexible Advantage STarter base systems for the HP 9000 rp7420 Server allow for faster configurations and lower
prices due to the semi configured base system bundles.
HP 9000 rp7420 Server FAST bundles
Product Number (Includes
base chassis and power
supplies)
AB205A
AB206A
AB207A
AB208A
1. Cell Boards (2)
2. Hot-plug Disks (4)
3. 2N Redundant Hot-swap System Power (2)
Number of dual core PA-
8900/8800 processor
modules (processors)
2 (4)
4 (8)
6 (12)
8 (16)
HP 9000 rp7420 Server System Overview-Front View
DA - 11895 U.S. QuickSpecs — Version 24 — 10/1/2006
Number of Cell Boards
1
1
2
2
4. N+1 Redundant Hot-swap Fans (2)
5. 2 Independant PCI Power Supplies
6. Removable Media DVD or DAT
HP 9000 rp7420 Server
Number of Core I/O
1
1
2
2
Page 1

Advertisement

loading

Related Manuals for HP 9000 rp7420

Summary of Contents for HP 9000 rp7420

  • Page 1 QuickSpecs HP 9000 rp7420 Server Overview The Flexible Advantage STarter base systems for the HP 9000 rp7420 Server allow for faster configurations and lower prices due to the semi configured base system bundles. HP 9000 rp7420 Server FAST bundles Product Number (Includes...
  • Page 2 QuickSpecs HP 9000 rp7420 Server Overview HP 9000 rp7420 Server System Overview-Rear View 1. N+1 PCI Coding Fans 5. Dual-grid 2N Redundant Power Inputs 2. System Backplane (right side) 6. Hot-swap Redundant Fans 3. Core I/O 7. 15 Hot-plug PCI-X Slots 4.

  • Page 3: Standard Features

    Four internal hot-plug LVD SCSI disks 1 removable media drive, DVD or DAT 14 PCI expansion cards Standard System 64 bit HP UX 11i v1 & 11iv2 operating system Features External Ultra160 LVD SCSI channel Four Internal SCSI controllers 10/100/1000Base-T LAN (with auto speed sensing)
  • Page 4 QuickSpecs HP 9000 rp7420 Server Standard Features High Availability N+1 Hot-swap cooling Redundant and hot-swap power supplies Hot-plug disks 2N power inputs (redundant line cords/dual power grid support) On-line memory page deallocation ECC protected SyncDRAM memory Full parity protection of data and address buses On-chip processor cache with ECC protection Memory "chip spare", "chip kill"...
  • Page 5 SMP server or divided into two smaller, hardware partitioned (nPars), logical servers. Cell Boards A minimum of one and a maximum of two cells can be ordered in an HP 9000 rp7420 Server. Each cell can be purchased with up to four active dual core PA 8900/PA 8800 processor modules (8 processors), or in combination with Instant Capacity processors.
  • Page 6 DIMMs or non stacked DIMMs (512 MB, 1 GB or 2 GB), but not both. The HP 9000 rp7420 and HP 9000 rp8420 servers share the same 2 GB, 4 GB, 8 GB, and 16 GB memory products. HP 9000 rp7420 Server Memory DIMMs...
  • Page 7 Each I/O controller contains 16 high-performance, 12-bit-wide links; these links connect to 18 slave I/O controller chips supporting the PCI card slots and core I/O. In the HP 9000 rp7420 Server, two links, one from each master controller, are routed through the system backplane and are dedicated to core I/O.
  • Page 8 The hot-plug operation is very easy, and can be done with minimal training and effort. The HP 9000 rp7420 Server supports a number of PCI and PCI-X HBA (I/O) cards for I/O expansion (see Table 2.7.5). Note that the PCI-X backplane is backward compatible with the older PCI backplane and can support many PCI HBA (I/O) cards.
  • Page 9 QuickSpecs HP 9000 rp7420 Server Configuration PCI 1 port 1000Base SX A6847A 11.00 / Yes Duplex SC Yes / Yes 15 / 15 PCI 1 port 1000Base T A6825A 11.00 / Yes Duplex SC Yes / Yes 15 / 15...
  • Page 10 Configuration Integrated The HP 9000 rp7420 Server chassis supports up to two core I/O boards (AB306A). Core I/O slots Multifunction I/O are located along the right rear vertical edge of the chassis. A minimum of one core I/O board set must be ordered with each system;...
  • Page 11 Configuration Core I/O Loading Rules Minimum of one Core I/O board set (primary) must be purchased with each HP 9000 rp7420 Server Load the Primary (1) MP/SCSI board into slot 1 and the LAN SCSI board into I/O cabinet 1 (slot 8).
  • Page 12 /20-amp branch circuit, the optimum configuration is to use one 16-amp (minimum) branch circuit per power cord. Due to the variety of 16/20 plugs used throughout the world, the HP 9000 rp7420 Server menu offers a choice of plug options.
  • Page 13 (Expressed as Volt-Amps.) The measured maximum worst case power consumption. This number represents the larges power consumption that HP engineers were able to produce for the server with any combination of hardware under laboratory conditions using aggressive software applications designed specifically to work the system at maximum load.
  • Page 14 HP server solution. Each 60 amp PDU can support up to two HP 9000 rp7420 servers if the PDU is not mounted in the same rack. Up to three HP 9000 rp7420 servers can be supported if the PDU is mounted within the same rack.
  • Page 15 (or the most important application) you intend to run on it. Alternatively, you can configure the HP 9000 rp7420 Server as a single partition, allowing all the resources to be focused on a single set of tasks, for example a large online transaction-processing application.
  • Page 16 HP 9000 rp7420 Server comes with rack sliders. These rack sliders enables the HP 9000 rp7420 Server to be slid forward out of the HP cabinet for servicing of internal components such as fans, cell boards, and I/O cards, while the system is still running.
  • Page 17 When field racking for the mid-range servers in any rack (10K G2, System E or 3rd party), the customer will have to order the appropriate service product (HP PN: HA124A1 Opt. 570 - HP Startup Field Racked Mid Server Service).
  • Page 18 Itanium 2 Madison, or mx2 modules on the same cell board. You cannot intermix PA 8800/PA 8900, Intel Itanium 2 Madison, or HP mx2 modules in the same server (with the exception that Intel Itanium 2 Madison and HP mx2 modules can be intermixed in the same server on differing cell boards and differing hard partitions).
  • Page 19 - rp7405/rp7410 core I/O card (A6793A) return credit-use A6793AN option 001 Software: - For the HP Integrity servers, the operating system needs to be upgraded to HP UX 11i version DA - 11895 U.S. QuickSpecs — Version 24 — 10/1/2006...

  • Page 20: Technical Specifications

    QuickSpecs HP 9000 rp7420 Server Technical Specifications Server model number rp7420 Server product Base A7025A number Number of processors 1-8 (16) (# of core) Supported Processors PA-8900 Dual core 1.1 L1 Cache (1.5-MB/core) 3 MB GHz Processors L2 Cache 64 MB PA-8900 Dual core 1.0...
  • Page 21 QuickSpecs HP 9000 rp7420 Server Technical Specifications I/O Buses and Slots Total Hot-plug PCI-X Slots (133 MHz×64 bits) 14 Dual channel slots (1060 MB/s each) 2 Single channel (530 MB/s each) Maximum I/O Cards Mass Storage 8-15 See supported I/O table...
  • Page 22 The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.