HP ProCurve 6400cl Installation And Getting Started Manual page 24
Procurve series switches
Hide thumbs
Also See for ProCurve 6400cl:
- Management and configuration manual (508 pages) ,
- Access security manual (404 pages) ,
- Management manual (664 pages)
Table of Contents
Advertisement
Installing the Switch
Installation Procedures
2-6
Installation Location - Before installing the switch, plan its location and
orientation relative to other devices and equipment:
•
In the front of the switch, leave at least 7.6 cm (3 inches) of space for
the twisted-pair and fiber-optic cabling.
•
In the back of the switch, leave at least 10.16 cm (4 inches) of space
for the cl module cabling.
•
On the sides of the switch, leave at least 7.6 cm (3 inches) for cooling,
except if the switch is installed in an open EIA/TIA rack.
Advertisement
Table of Contents
