Operation; Switching On; Switching Off; Selecting And Adjusting The Sound - Silvercrest KH 2391 Operation Manual

Installation / Operation
• Place the rear left-hand edge of the control
panel 1 on the control panel attachment point
ds on the front of the device.
• Ensure that the plug-in connection strip
positioned in front of the connection socket
• Carefully press the rear right-hand edge of the
control panel 1
attachment point
place.
• Fold the control panel
to lock into place.

Operation

L

Switching on

L
• Press the
The factory settings of the device are as follows:
• The word [WELCOME] appears in the display
9
window .
• The buttons are illuminated in blue (these can
be adjusted on two levels).
• Press the
MU/DIM
is pressed again for 2 seconds the brightness
of the display window is increased once more.
- The tuner is activated and [FM1] (1st FM
band), [87.50] (station frequency) appears
in the display window
- The loudspeakers play back the reception
from the tuner.
• Turn the "SEL / VOL" control knob
the volume as desired.
14 GB/IE
KH2391_Content_UK.indd 14
cr
against the control panel
dp
until it distinctly locks into
1 upwards and allow it
button cp .
bo
button for 2 seconds. If it
. [AF] flashes.
9
co to adjust

Switching off

L
• Press the
is illumination of the control panel
dl
. and the time appears in the display window
When the radio is switched off it stores all
settings from the last time it was operated. The
device automatically adjusts the time with the
help of the radio signals received. When the
radio is switched on again it plays back the last
audio storage medium used or the tuner.

Selecting and adjusting the sound

L
VOL: Volume of the loudspeakers
• Adjust the loudspeakers to the desired volume
by turning the "SEL / VOL" control knob
BAS: Bass (lower range of the loudspeaker sound)
• Press THE "SEL / VOL" control knob
[BAS] appears in the display window
• Turn the "SEL / VOL" control knob
desired bass level.
Values between [-7] and [7] can be selected.
TRE: Treble (higher range of the loudspeaker sound)
• Press the "SEL / VOL" control knob
until [TRE] appears in the display window
• Turn the "SEL / VOL" control knob
desired treble level.
Values between [-7] and [7] can be selected.
BAL: Balance (difference in volume between the
left [L] and right [R] loudspeakers)
• Press the "SEL / VOL" control knob
[BAL] appears in the display window
• Turn the "SEL / VOL" control knob
desired balance.
Values between [10L] and [10R] can be
selected. The mean value is [0].
FAD: Fading (difference in volume between the
front [F] and rear [R] loudspeakers)
• Press the "SEL / VOL" control knob
[FAD] appears in the display window
• Turn the "SEL / VOL" control knob
button cp . The background
1 goes off
co .
co until
9
.
co to set the
co
repeatedly
9
co
to set the
co
until
9 .
co to set the
co until
9 .
co
to set the
05.09.2006 14:49:13 Uhr
9
.
.