Filter Replacement; Troubleshooting; Assistance Or Service; In The U.s.a - Whirlpool AP15030 Use And Care Manual

6. Gently w ash thefront g rille insoapy w ater.
NOTE: The grille isnotdishwasher safe.
7. Reassemble thefilters asshown i ntheprevious illustration.
8. Place thebottom tabs onthefront g rille intotheslots inthe
base oftheairpurifier. Push thetopofthegrille forward u ntil
thegrille locks intoplace.
g. Plug inairpurifier orreconnect power.
10.Turn thefanspeed knob tothedesired f anspeed.
5. Place thebottom tabs onthefront g rille intotheslots inthe
base oftheairpurifier. Push thetopofthegrille forward u ntil
thegrille locks intoplace.
6. Plug inairpurifier orreconnect power.
7. Turn thefanspeed knob tothedesired fanspeed.
8. Press t heFilter Reset button f or5seconds toturn offthefilter
indicator light(s) andreset thetimer.
NOTE: Pressing theFilter R eset button before e ither o fthe
filter indicator lights glows willnotreset thetimer.
NOTE: The filter indicator lights ontopoftheairpurifier will g low
when itistime toreplace e ither thepre-filter ortheHEPA f ilter.
For t hemost e fficient operation oftheairpurifier, under n ormal
conditions itisrecommended that y oureplace t hepre-filter every
three months andtheHEPA f ilter every y ear. See "Replacement
Filters" inthe"Assistance orService" section.
1. Turn thefanspeed knob toOff.
2. Unplug a irpurifier ordisconnect power.
3. Place fingers o nthefront r elease tabs. G ently p ush thetabs
inand pull t hefront g rille forward t oremove it.
4. Remove andreplace theindicated filter. I nstall thenew HEPA
filter inthesame direction shown b ythearrow located o nthe
filter f rame. Install thenew pre-filter byplacing i t onthetabs.
NOTE: Donottrytowash and reuse either theHEPA f ilter or
thepre-filter.
TROUBLESHOOTING
First try the solutions suggested here and possibly avoid the
cost of a service call...
Air purifier will not run.
• Check the following:
Is the air purifier turned on?
Is the power cord plugged into a grounded 3 prong outlet?
Has a fuse blown, or has a circuit breaker tripped?
Was a regular fuse used? Use a time-delay fuse or time-delay
circuit breaker.
ASSISTANCE ORSERVICE
Before calling for assistance or service, please check
"Troubleshooting." It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
Call the Whirlpool Customer eXperience Center
toll free: 1-800-253-1301.
Our consultants provide assistance with:
• Features and specifications on our full line of appliances.
• Installation information.
• Use and maintenance procedures.
• Accessory and repair parts sales.
• Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
Referrals to local dealers, repair parts distributors, and
service companies. Whirlpool designated service technicians
are trained to fulfill the product warranty and provide after-
warranty service, anywhere in the United States.
To locate the Whirlpool designated service company in your
area, you can also look in your telephone directory Yellow
Pages.
For further assistance
If you need further assistance, you can write to Whirlpool
Corporation with any questions or concerns at:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, M149022-2692
Please include a daytime phone number in your correspondence.
Replacement filters may be ordered by calling our Customer
eXperience Center at 1-800-253-1301.
You may also visit our website www.whirlpool.com.
NOTE: This information is also located on the HEPA filter for your
convenience.
HEPA Filter Pre-filter
Air Purifier Replacement Replacement
Model No. Part No. Part No.
AP15030 1183050 or 1187017 1183062
AP25030 1183051 or 1187018 1183062
AP35030 1183052 or 1187021 1183063
AP45030 1183054 or 1187022 1183063