Rs232C Connection With Plc Tool Port - Panasonic GT01 User Manual

4.2.2 RS232C Connection with PLC Tool Port

Connecting with 5 V DC type
Usable models
PLC
FP-X
FPΣ
Mini-DIN 5-pin
FP0/FP0R
loose-wire cable
FP-e
FP2/FP2SH
Connecting to the TOOL port
Note: Connecting to the COM port is not available.
Keep the cable no longer than 3 m.
-
In case of connecting to PLC with all expansion slots used, prepare an external 5 V DC power supply
-
for the GT01 due to current consumption limits.
When using the FP2/FP2SH, check whehter or not the power can be supplied from the TOOL port
-
according to the calculation method of the number of expansion units described in the hardware
manual.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
PLC communication cable
AIGT8142
Programmable display
5 V DC type RS232C type