At The End Of The Programme; Switching Off; Unloading The Dishwasher - Miele 09 276 830 Operating Instructions Manual

At the end of the programme

At the end of a programme, the
In-operation indicator light will be
visible flashing slowly with the door
shut.
If the door has opened slightly, and
Finished AutoOpen
or
display, this indicates that the
programme has finished.
The drying fan will continue to run
for a few minutes at the end of the
Quick wash programme.
^ Open the door completely to
re-engage the door closing
mechanism.
You can now empty the dishwasher.
The In-operation indicator light will go
out 10 minutes after the end of the
programme.
,
If you have deactivated the auto-
matic door opening function (see
"Settings menu, AutoOpen"), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully. Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
O
appears in the

Switching off

At the end of a programme:
^ Open the door.
^ Switch the dishwasher off using the
On/Off button K.
The dishwasher will continue to use
electricity until it is switched off with
the On/Off button K.
If the dishwasher is not going to be
used for a longer period of time, e. g.
whilst on holiday, the stopcock should
be closed.

Unloading the dishwasher

Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
First unload the lower basket, then the
upper basket and finally the cutlery tray
(depending on model).
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the dishes in the lower
basket.
Operation
35