Sony OXFORD Operation Manual page 348

7-8 Offline Automation
Using DURATION mode for New Cut Data
Use the following procedure to enter new cut data
against a specified duration.
Select the Cut type
Click on DURATION and then select the cut type in
the upper left hand selector block.
Set the Duration
Click DURATION in the upper left selector to set the
duration. This procedure is described at the beginning
of this section since it applies to both faders and cuts.
Set cuts and uncuts
Click on the channels of interest. They cycle through
3 states:
RED • Cut for the duration
WHITE • Uncut for the duration
BLUE • No change for the duration
Note
Any underlying data within the duration will be overwritten.
When the cuts are displaying the desired cut statuses
reflected by the colour coding, click on COMMIT to
confirm the edit.
7-88
Chapter 7 Session Management
Command Dialogue
At the base of the screen, the User Command Dialogue
Line bar displays commands from the dedicated
Control Keyboard and QWERTY Keyboard for
confirmation before {ENTER} .
Menu options
Menu options available using the softkey functions
displayed at the foot of the Offline screen page are as
follows:
- Selects the previous screen
page.
- Selects the System screen
SYSTEM
page directly.
PROJECTS - Selects the Artists/Projects &
Titles page.
MIXES - Selects the Mixes & Cues
page.
SNAPSHOT - Selects the Snapshots, Copy
and Link page.
ASSEMBLE - Selects the mix compilation
assembly field and the Mixes
& Cues page.
BACKUPS - Selects system Back-up
functions.
SCREEN - Selects pop-up showing all
available screen selections.
Click on any one to select it.