Table of Contents
Advertisement
GD8000 User Guide
erly, the Power LED on the AC adapter should be lit as well as
the External Power LED on the GoBook MR-1.
If the AC adapter is connected but the unit will still not turn on,
„ „
make sure the electrical outlet you are using is working
Check to make sure the battery is installed and charged properly
„ „
If the battery does not begin charging, perform the following:
„ „
1.
Remove the
battery.
2. Connect the AC adapter.
3. Turn on the computer by pressing the
4. Reinstall the battery. The Battery LED is a steady blue
while the battery is charging.
Keyboard and Mouse Troubleshooting
Something unexpected happens when I press a key
You may have pressed a key combination that performs a
Windows function. Make sure you are pressing the correct
keys for the application you are running.
Incorrect characters appear on the screen when I
press certain keys
You may be in Num Lock mode. Press
Num Lock mode off.
NUM LOCK
on your keyboard next to the
I have difficulty double-clicking the mouse fast
enough
For Windows XP:
Select Start, Control Panel, Mouse. The Buttons tab contains
the setting for the double-click speed.
For Windows Vista:
Select Start, Control Panel, Hardware and Sound. Then select
Mouse to configure double-clicking speed and other options.
For Windows 7:
1.
Start, Control Panel, Hardware and Sound
Select
2.
Devices and Printers
Under
Mouse Properties
to the
3.
Buttons
On the
tab use the
your mouse. Then you can set double-click speed.
General Dynamics Itronix | 72-0137-003
POWER
BUTTON.
NUM LOCK
to toggle
is on the top row of buttons
F12
key.
.
Mouse
select
. This will bring you
window.
Devices
drop-down menu to select
Modem Troubleshooting
The modem doesn't work
When you first try to use
HyperTerminal
„ „
the system responds with a message asking if you want to install
the modem. Answer "
Yes
instructions on the screen to install it.
Make sure the communication settings are correct in your
„ „
application. Refer to the online help for your application.
NOTE
HyperTerminal is not available with Windows Vista or
Windows 7.
The modem doesn't dial a number
If you are using an external modem, make sure the cables are
„ „
attached correctly.
Make sure your communications parameters are correct in your
„ „
application. Refer to the online help for your application.
The modem dials and receives an answer but does
not establish a connection
You may have incorrect parameters selected for your application
„ „
to talk with the remote modem. Refer to the online help for your
application.
You may need to adjust your modem's baud rate or protocol
„ „
selection.
PC Cards
I can't remove the PC card
Press the ejector button located inside the PC card door on the
„ „
side of the computer. The button will pop out. Press the ejector
button again to eject the PC card. Slide the card out.
If the ejector button malfunctions when you press it, release the
„ „
button and then press it again.
Read Error
If a memory card that is not properly formatted is installed in
the PC Card slot, it will cause this error.
The computer locks up when I remove the PC card
Before you remove the card, select the PC card icon (
on the taskbar (in the tray area near the clock in the lower right
corner) and choose "Stop [card name] card."
Troubleshooting
or similar application,
" to this question and follow the
or
)
Advertisement
Table of Contents
Troubleshooting
