4-4 Linux Setup
4.
Change the root password.
Change the password using passwd command.
5.
Set LAN configuration.
See "Step C-1: Set Dual LAN Card Configuration" (4-10) and perform the setup.
6.
Connect and setup the optional devices.
If there are optional PCI boards and peripheral devices which have been purchased
separately, power off the server and then follow the instructions of "PCI board" in
the separate volume of User's Guide and the manuals of devices. If you added a LAN
card or a disk to the server, you need to set dual configuration. For details, see "Step
C-1: Set Dual LAN Card Configuration" (4-10) and "Step C-2: Set Dual Disk
Configuration" (4-13).
Setup is now completed.
To perform the setup again, see "Setup Procedure When Reinstalling the OS" (4-5).