Nec Esmpro Manager - NEC Express5800 320Lb User Manual

6. Select [Manager (SNMP)].
The [SNMP Trap Setting] screen will appear.
7. Enable [Enable the function].
Set enable/disable using space key. When checked, it is enabled. When not checked, it is
disabled.
8. Click the [Add] button to set [Trap Destination IP].
Set the IP address of the device where the NEC ESMPRO Manager is installed.
9. Finish the tool.
The report will be performed to the NEC ESMPRO Manager.
TIPS:
For details of the settings and the setting methods of report other than Manager (SNMP),
see User's Guide of the NEC ESMPRO Agent.
The User's Guide is stored on the following place of the backup CD-ROM2.
/nec/esmpro_sa/doc/users.pdf

NEC ESMPRO Manager

Linked with NEC ESMPRO Agent installed in the server, NEC ESMPRO Manager monitors the
server status and receives alerts from the server.
Error
When a failing module in the server is to be replaced, NEC ESMPRO Manager enables logical
module disconnection from the server and logical installation after module replacement.
For the installation of NEC ESMPRO Manager and notes on the operation, see the separate volume
of User's Guide.
Procedures after Completion of Installation 5-7
NEC ESMPRO Agent
Notify
Monitor
NEC ESMPRO Manager