42
en | Configuration
5.6.5
Test signal submenu
Item
Show camera
ID
Test pattern
EXIT
5.6.6
Camera ID submenu
Item
Camera ID
Display ID pos.
Camera ID
border
MAC address
Ticker bars
AM18-Q0648 | v1.0 | 2013.03
Selection
Off, On
Color bars,
Raster,
Impulse,
Cross
Impulse,
Crosshatch
Selection
Off, Top left,
Top right,
Bottom left,
Bottom right
On, Off
On, Off
Installation Manual
Description
Select On to overlay the camera ID on
the video test signal.
Select the desired test pattern to help
installation and fault-finding.
Returns to Install menu.
Description
Enter a 17-character camera name. Use
Left/Right to change position in the
string; use up/down to select
character. Use Select to exit.
Select the screen position of the
camera ID.
Displays a grey border behind the
camera ID to make it easier to read.
Shows MAC address (factory set,
cannot be changed).
The ticker bar moves continuously to
show that the image is live and not
frozen or played back.
FLEXIDOME 5000 AN
Bosch Security Systems